1-6 EB 8384-3 EN
Safety instructions and measures
Malfunction due to initialization not yet completed.
The initialization causes the positioner to be calibrated to adapt it to the mounting situa-
tion. After initialization is completed, the positioner is ready for use.
Î Initializethepositioneronrststart-up.
Î Re-initialize positioner after changing the mounting position.
Risk of positioner damage due to incorrect grounding of the electric welding equip-
ment.
Î Do not ground electric welding equipment near to the positioner.
Incorrect cleaning will damage the window.
The window is made of Makrolon
®
and will be damaged when cleaned with abrasive
cleaning agents or agents containing solvents.
Î Do not rub the window dry.
Î Do not use any cleaning agents containing chlorine or alcohol or abrasive cleaning
agents.
Î Use a non-abrasive, soft cloth for cleaning.
To Next Page
Loading...
