Samson 3730 Series - After-sales service

17-6 EB 8384-3 EN
Mounting parts/accessories Order no.
Accessories for
positioner
Connecting plate (6)
G
¼
1400-7461
¼
NPT 1400-7462
Pressure gauge bracket (7)
G
¼
1400-7458
¼
NPT 1400-7459
Pressure gauge mounting kit up to max.
6bar
Stainlesssteel/brass 1402-1637
Stainlesssteel/stainlesssteel 1402-1638
Bracket to mount the positioner on a wall (Note: The other fastening parts are to
be provided at the site of installation as wall foundations vary from site to site).
0309-0184
1)
Only new connecting plates can be used with new actuators (Index 01). Old and new plates are not interchange-
able.
17.2 After-sales service
Contact our after-sales service for support
concerning service or repair work or when
malfunctions or defects arise.
E-mail contact
You can reach our after-sales service at
aftersalesservice@samsongroup.com.
Addresses of SAMSONAG and its subsid-
iaries
The addresses of SAMSON AG, its subsid-
iaries, representatives and service facilities
worldwide can be found on our website
(www.samsongroup.com) or in all SAMSON
product catalogs.
Required specications
Please submit the following details:
− Order number and position number in
the order
− Specicationsonthenameplate:
– Supply pressure
– Explosion protection marking
– Date of manufacture
– Firmware version
– CongurationID
– Serial number
– Model number