Samson 41-23 - Specific Warnings on the Regulator

EB 2512 EN 1-9
Safety instructions and measures
1.4 Warnings on the regulator
Warning Meaningofthewarning Location on the device
Attention !
Do not
disassemble the
valve without
relieving the
tension from the
set point spring.
Warning to indicate that the set point springs are
loaded.
There is a risk of serious head or face injury through the
sudden release of the set point springs while unscrewing
the crossbeam when the set point springs are loaded.
Completely relieve
the tension from
the set point
springs before
unthreading the
two nuts.
Warning to indicate that the set point springs are
loaded.
Thereisariskofinjurytohandsorngersthroughthe
sudden release of the actuator stem if they are inserted
betweenthecrossbeamandsetpointspringswhileex-
changing the actuator.
Unlock/unlockthe
plug stem
Warningtoindicatepropertydamageatthebellows
seal.
There is a risk of damage to the bellows seal due to the
incorrect mounting or removal of the plug stem.