Samson 5824 Series - Measures for Preparation; Unpacking; Transporting and Lifting; Transporting

22 EB 5824-2 EN
Measures for preparation
4 Measures for preparation
After receiving the shipment, proceed as fol-
lows:
Check the scope of delivery. Compare
the shipment received with the delivery
note.
Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).
4.1 Unpacking
Do not remove the packaging until immedi-
ately before mounting and start-up.
1. Remove the packaging from the electric
actuator.
2. Dispose of the packaging in accordance
with the valid regulations.
4.2 Transporting and lifting
4.2.1 Transporting
− Protecttheelectricactuatoragainstexter-
nalinuences(e.g.impact).
− Protect the electric actuator against mois-
ture and dirt.
− Observe the permissible transportation
temperatureof–20to+70°C.
4.2.2 Lifting
Due to the low service weight, lifting equip-
ment is not required to lift the electric actua-
tor.
4.3 Storage
Risk of electric actuator damage due to
improper storage.
− Observe the storage instructions.
− Avoid long storage times.
− Contact SAMSON in case of different stor-
age conditions or long storage periods.
We recommend regularly checking the elec-
tric actuator and the prevailing storage con-
ditions during long storage periods.
Storage instructions
− Protecttheelectricactuatoragainstexter-
nalinuences(e.g.impact).
− Protect the electric actuator against mois-
ture and dirt.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe the permissible storage tem-
peraturefrom–20to+70°C.
− Do not place any objects on the electric
actuator.
Note
NOTICE
!
Note