05 Setup
Setup
Before Starting (Plug & Play)
Turn on your TV after connecting the product.
(When the product is connected to TV for the
first time, product will turn on automatically
and the Plug & Play screen will be displayed.)
Press the ►▲▼ buttons to select the desired
language, then press the ENTER button.
Press the ►▲▼ buttons to select the desired
country, then press the ENTER button.
Enter the desired 4-digit password using the
number buttons.
Press the ►▲▼ buttons to select the desired
Antenna Source, then press the ENTER
button.
If you select Air : Press the ▼ button to
select the Search, then press the ENTER
button.
If you select Cable : Press the ▼ button
to select the Next, then press the ENTER
button. Set the Search Mode option, then
press the ▼ button to select the Search
button.
1.
2.
3.
4.
5.
•
•
Press the ►▲▼ buttons to select the desired
Clock Mode.
If you select Auto : Press the ENTER
button.
If you select Manual : Press the ▲▼◄►
button to set the clock, then press the
ENTER button.
Press the ▲▼ button to select the desired TV
Aspect ratio, then press the ENTER button.
(See page 35)
Press the ◄► buttons to the select the
desired Network Settings: Wired, Wireless or
PBC (WPS), then press the ENTER button.
(See pages 41~45)
The message “Enjoy your watching” will be
displayed. Press the OK button.
The broadcasting channel will be displayed.
NOTE
When the product is connected to TV for the first
time, product will turn on automatically.
Do not confuse because this is not malfunction.
If the product is left in the home menu more than
5 minutes without being used, a screen saver will
appear on your TV.
Password
France only : Enter the desired 4-digit password
using the number buttons.
Other : Enter the desired 4-digit password using
the number buttons.
* Default password is set to 0000.
6.
•
•
7.
8.
9.
✎
▪
▪
▪
-
-
a Previous d Skip > Move " Enter
Plug & Play
Antenna Source : Air
Search
" Enter
Plug & Play
Select the OSD Language.
Menu Language : English
To Next Page
Loading...
