PREPARATION
• Before cleaning, remove objects which are less than 9 cm height and are
lightly on the oor as the Jet Bot can push along them, or the objects can
be caught in the Jet Bot’s Side Brush or Driving Wheels. (Fixed objects
can be detected by the Jet Bot when its bumper is pressed and will avoid
them.)
• If oil such as cooking oil is on the oor, the Jet Bot may become stationary
because the oor is slippery. Remove the oil rst before cleaning with the
Jet Bot.
12
1_VR8500_EN_00858C-02_SW.indd 12 2022-10-13 오후 6:06:09
To Next Page
Loading...
