English-9
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
Purchase your set
Find that the remote control is no longer operating correctly
1
Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
2
Install two
AAA
size batteries.
◆
+
on the battery against
+
on the remote control
◆
-
on the battery against
-
on the remote control
3
Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
01-BN68-00633C-00Eng.qxd 4/18/04 7:35 AM Page 9
To Next Page
Loading...
