English-12
Switching On and Off
The mains lead is attached to the rear of your set.
1
Plug the mains lead into an appropriate socket.
Result
: When the power cord is plugged in, the LED turns red.
2
Press the
POWER
button to switch on.
3
To switch off, press the
POWER
button again.
Placing in Standby Mode
Your set can be placed in Standby mode in order to reduce the
power consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
Press the
POWER
button.
2
To switch back on, simply press the
POWER
button again, a
numeric button, or
channel or button.
Do not leave your set in Standby mode for long periods of
time (when you are away on holiday, for example).
Turn off by pressing the
POWER
button.
It is best to unplug the set from the mains and aerial.
01-BN68-00633C-00Eng.qxd 4/18/04 7:35 AM Page 12
To Next Page
Loading...
