Samsung P55 - Wired LAN Related

144
Q
How do I receive a fax while the system is in
power saving mode (Rest mode)?
A ToreceiveafaxinStandby mode, you have to
set it up as follows.
 Theautomaticfaxreceptionfunctionofthefax
programneedstobeactivated.(Formoreinformation,
seethecorrespondingfaxprogrammanual.)
 Click Start > Control Panel > Network and Internet
Connections.
 Under See Also, click Phone and Modem Options.
 In the Power ManagementtaboftheModem
Propertieswindow,selectthe“Withthisdevice,exit
thecomputerfromstand-bymode”itemandthenclick
OK.
Theabovesettingenablesthemodemtoturnon
thesystemandreceiveafaxwheninpowersaving
mode.
Q <Wake On LAN> function
A1 <WakeOnLAN>isafunctionthatactivatesthe
system in rest mode when a signal (such as ping
or magic packet commands) arrives from network
(wiredLAN).
To use <Wake On LAN> function:
 Select My Network Places > View network
connections from the Desktop.
 ClicktherightbuttononthetouchpadoverLocal
Area Connection, and select Properties.
 Click Congure, and select Power Managementtab.
Select“Allowthisdevicetobringthecomputeroutof
standby”,thenclick
OK. Restart the system.
–Whenturningthecomputeroffwhenthenetworkis
connected without selecting the <Wake On LAN>
function, the LAN LEDmaynotbeturnedoff.
– The <Wake On LAN>functionisonlyavailable
whentheLANisturnedon.
–WhenconnectingawiredLANwhileusinga
wirelessLAN,the
<Wake On LAN> function may
not work. To use the <Wake On LAN> function,
select“DonotuseWirelessLAN.”
–ConnectingwiredLANwhileusingwirelessLAN
maynotexecute
<Wake On LAN> function.
CongurewirelessLANto“Disable”touse<Wake
On LAN> function.
Wired LAN Related