93
Setup and Reset
7
7 Setup and Reset
7.6 Key Repeat Time
Control the response rate of a button when the button is pressed.
7.6.1 Configuring Key Repeat Time
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Key Repeat Time and press [ ] on the product. The following screen
will appear.
z Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
To Next Page
Loading...
