- 62 -
TV-Viewing Support Functions
Use the functions that are supported by digital or analogue channels.
Changing the broadcast signal
Live TV Channel List
After pressing the right directional button on your remote control, and then move the focus to Terrestrial or Cable,
press the Select button.
" You do not need to use this function if your TV is connected to a cable box or satellite box.
Scanning for available channels
Settings Broadcasting (Auto Tuning Settings) Auto Tuning
" This function may not be supported depending on the model or geographical area.
" If the TV is connected to a cable box or satellite box, you do not need to do this.
" The DVB-T2 system may not be supported depending on the geographical area.
" The Auto Tuning Settings may not appear depending on the model or geographical area.
Selecting the cable network search option
Settings Broadcasting (Auto Tuning Settings) Cable Search Option
Sets additional search options such as the frequency and symbol rate for a cable network search.
" This function may not be supported depending on the model or geographical area.
" The Auto Tuning Settings may not appear depending on the model or geographical area.
Scanning for available channels on standby mode
Settings Broadcasting (Auto Tuning Settings) Standby Auto Tuning
Automatically scan for channels while your TV is in standby mode.
" This function may not be supported depending on the model or geographical area.
" The Auto Tuning Settings may not appear depending on the model or geographical area.
To Next Page
Loading...
Need help?
General