SAMWONTECH
2nd Edition of TEMP2000_Series IM : July. 16. 2010 Page 10 / 87
▶ Mounting on surface of the wall
☞ Detach the BACK COVER by pulling down ⓑ part from main body, while pushing ⓐ part.
☞ Mount the BACK COVER on sureface of the wall with screw.
☞ Put and fix the main body of CONTROL UNIT into the mounted BACK COVER.
76.6
25.56
Required screw torque :
0.3N.m(3Kgf.m)
M3*12
Control
* External Hole dimension
BACK COVER
ⓑ Pull down
ⓐ Push