Samwontech TEMP2500 - Alarm and Segment Alarm Relay Setup

SAMWONTECH
2nd Edition of TEMP2000_Series IM : July. 16. 2010 Page 44 / 87
5.1.2 Alarm Signal/Seg Alarm Signal Relay Setup Screen
① Set Alarm Signal Relay. (AL1∼AL4)
② Set Seg Alarm Signal Relay. (SEG AL1∼SEG AL4)
Table 5-2 Alarm Signal/Seg Alarm Signal Relay Setup Screen Parameter
Parameter Range Unit Default
Alarm Signal 1 ~ Alarm Signal 4 0~32 ABS 0
Seg Alarm Signal 1~ Seg Alarm Signal 4 0~32 ABS 0
[Figure 5-2] Alarm Signal/Seg Alarm Signal Relay Setup Screen
①
②