SAMWONTECH
2nd Edition of TEMP2000_Series IM : July. 16. 2010 Page 54 / 87
6.2.1 Communication Setup Screen-2
▶ This is to select required items for SYNC Communication.
① Set Communication Speed for SYNC Communication.
② Set SYNC Master.
Table 6-2 Communication Screen-2 Parameter
Parameter Range Unit Default
SYNC BALD RATE 9600, 19200, 38400, 57600, 115200 ABS 9600
SYNC MASTER UNUSE, USE ABS UNUSE
[Figure 6-5] Communication Setup Screen-2/1
[Figure 6-6] Communication Setup Screen-2/2
①
②
To Next Page
Loading...
