Page 12
Mains Power
This unit is designed only to operate with the supplied AC adapter.
Connecting the radio to any other power source may damage it.
• Unwind the AC adapter cable to its full length.
• Connect the plug at the end of the cable to the DC: 6V socket on
the back of the radio.
• Plug the AC adapter into a mains socket and switch the socket
on (if necessary). The unit is now connected and ready to use.
To switch the unit o completely, always unplug the
mains adapter from the mains socket.
Getting Started
SDABXCR13_IB_160929_will.indd 12 30/9/2016 2:37 PM
To Next Page
Loading...
