Page 34
Sleep
This function allows you to programme the unit to switch to
standby mode by itself after a set time.
• Select the ‘Sleep’ option from the menu.
• Press TUNE/SELECT to conrm.
The sleep time display will open.
Turn the TUNE/SELECT dial to select the Sleep time you want.
Choose from: 15, 30, 45, 60,
90 minutes or ‘OFF’.
Press the TUNE/SELECT dial to conrm the setting.
The display will show the clock time but the
sleep indicator will stay on to indicate that the
radio is in “Sleep” mode.
The radio will continue to play until the sleep
time expires, then set to Standby.
To check the time remaining before the radio enters sleep mode:
1. Select the ‘Sleep’ option from the menu.
2. Press TUNE/SELECT to conrm.
The time remaining will display for a short period and then the screen
will revert to the previous display.
Sleep Mode
Sleep
indicator
SDABXCR13_IB_160929_will.indd 34 30/9/2016 2:37 PM
To Next Page
Loading...
