Page 41
Language
This setting changes the language used for the display menus.
• Select the ‘Language’ option from the menu.
• Choose one of the languages available.
• Press TUNE/SELECT to conrm.
Factory Reset
The Factory Reset function will delete all station lists, radio presets
and alarm settings. It may be necessary to reset your radio when
you move to another area. This will enable the radio to erase and
re-acquire the new station list.
• Select the ‘Factory Reset’ option from the menu.
• Select ‘Yes’ if you want to continue. (‘No’ if you don’t)
• Press TUNE/SELECT to conrm.
After a short delay, the radio will re-start and set to Standby.
The screen will also go blank.
• Now press the VOLUME/STANDBY control to switch the
radio on.
Software Version
This function will display the software version used in your radio.
The information may be useful to a service engineer.
• Select ‘SW VER’ from the menu.
• Press the MODE/MENU control to exit the menu system.
Other Menu Options
SDABXCR13_IB_160929_will.indd 41 30/9/2016 2:37 PM
To Next Page
Loading...
Need help?
General
