Sandstrom SDABXCR13 - FM Display Customization; Altering FM Display Modes

Page 32
Altering the Display Mode
This function alters what is displayed on the bottom line of the
screen. Some display modes depend on what the station broadcasts
— dierent stations display dierent information.
• Press MODE/MENU. The display will show “RECALL”
• Rotate TUNE/SELECT until the word “DISPLAY” displays.
• Press TUNE/SELECT again.
• Rotate TUNE/SELECT until the chosen display mode displays.
• Press TUNE/SELECT to conrm the new mode and exit.
The Display Modes are:
FREQUENCY: The Station Frequency is displayed
PS: This is an eight-character display that represents a station’s call
letters or station name. If the information is available it will display. If
the information is not available the station frequency is displayed.
RADIO TEXT: if the radio station is broadcasting RDS text, this will
appear as scrolling text. If the station is not broadcasting any text,
the message “NO TEXT” will display
PROGRAM TYPE: The type of programme broadcast by the station
by the station e.g. Music, News, etc. (This is dependent on whether
your chosen station is broadcasting this information).
DATE: The Calendar Date will display.
AUDIO INFO: This tells you the Audio mode being broadcast.
Normally this will be “AUTO”. This means that the station will usually
broadcast in Stereo but occasionally broadcasts in Mono.
Displaying a Station Name
If “MONO” is displayed this means that the station
usually broadcasts in Mono only, or that the “Mono”
option has been selected in the menu. (See Page 29)
SDABXCR13_IB_160929_will.indd 32 30/9/2016 2:37 PM