Page 43
Cleaning the radio
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or
abrasives.
• Do not spray an aerosol at or near the unit.
Maintenance
Ensure the unit is fully unplugged from the
mains socket before cleaning.
Troubleshooting
If a problem does occur, it may often be due to something very
minor. The following table contains various tips.
Symptom
Suggestion
No power.
• Check that the AC adapter is connected
and plugged into a power socket.
Poor radio
reception.
• The signal may be weak. Try re-
positioning the aerial. If this doesn’t
work check the radio in a dierent
location. Avoid placing the radio
near computers and other electronic
equipment.
No radio
information text.
• The signal may be too weak to receive
information text.
• Not all stations broadcast information
text.
No response to the
controls
• Disconnect AC power. Wait 10 seconds.
Re-connect AC power.
SDABXCR13_IB_160929_will.indd 43 30/9/2016 2:38 PM
To Next Page
Loading...
