SINUS MINI High performance Vector Control Inverter User Manual
12
Chapter 2 Inverter Installation
To ensure the safe use of this product, to maximize the performance of the inverter and to ensure the
reliable operation of the inverter, please strictly follow the environment, wiring, ventilation and other
requirements described in this chapter
2.1 Installation environment
In order to give full play to the performance of this product and maintain its function for a long time, the
installation environment is very important. Please install this product in the environment that meets the
requirements shown in the following table
Installation indoor without direct sunlight
No condensation under 95%RH
Please install the inverter in the following places:
●No oil fog, corrosive gas, flammable gas, dust and other places；
●Metal powder, oil, water and other foreign matter will not enter the frequency
inverter inside the place (do not install the frequency inverter on wood and other
flammable substances above);
●A place where radioactive substances are not flammable；
●A place where no noxious gas or liquid is found；
●A place where little salt is eaten；
●A place where there is no direct sunlight
Below 10～ 20Hz: 9.8m/s2; Below 20～55Hz∶5.9m/s2
To Next Page
Loading...
