Sanyo LCD-32R45F User Manual

Basic Operations
Plug the power cord into an AC power outlet.
Press the Power button. Your TV turns on.
Press again to turn off your TV. When you turn off your TV, it goes into standby mode.
Turning On/Off the Power
Selecting the Input Signal Source
1
2
Press INPUT button.
Press 6or 5to select the input source. Options include:
On-Screen Menu Language Selection
1
3
Press MENU.
Press 5 or 6to select Menu Settings item, press ENTER to access.
Press 3or4to select Setup menu, press 6 to access the menu.
2
5
Press EXIT to close the menu.
16
Note: If there is no signal input for a certain time, the TV will auto go to standby mode.
4
Press 5 or 6to select Menu Language item, press 3or4to select
your desired language.
Select
Move
MENU
Exit
Transparency
25%
Menu Language
English
Select
Move
MENU
Exit
Time
Closed Caption
VGA Settings
Input Label
Restore Default
Audio Only
Parental Controls
Off
Menu Settings
Press ENTER
TV
AV2
S-Video1
Component1
Component2
HDMI1
HDMI2
HDMI3
VGA
INPUT SOURCE
AV1
S-Video2
3
Press ENTER button to confirm the selection.
! TV — Watch the TV signal.
! AV1 — Watch the signal from the AV 1 input terminals.
! AV2 — Watch the signal from the AV 2 input terminals.
! S-Video1 — Watch the signal from the S-VIDEO1 input terminal.
! S-Video2 — Watch the signal from the S-VIDEO2 input terminal.
! Component1 — Watch the signal from the COMPONENT 1 input terminals.
! Component2 — Watch the signal from the COMPONENT 2 input terminals.
! HDMI1 — Watch the signal from the HDMI 1 input jack.
! HDMI2 — Watch the signal from the HDMI 2 input jack.
! HDMI3 — Watch the signal from the HDMI 3 input jack.
! VGA — Watch the signal from the VGA jack.
Note:
On the remote control five direct input source select buttons (VIDEO/HDMI/COMP/VGA/TV) are provided.
=
VIDEO button: Press repeatedly to cycle between AV and S-Video inputs.
=
HDMI button: Press repeatedly to cycle between HDMI inputs.
=
COMP button: Press repeatedly to cycle between Component inputs.
=
VGA button: Press to view a computer connected to your TV.
=
TV button: Press to select TV.
SetupPicture Audio Channel
Audio Channel
SetupPicture
1
2
3
Warning: When the TV is in standby mode, power is still flowing into the TV. To completely disconnect power, unplug the power
cord.

Sanyo LCD-32R45F Specifications

General

Brand	Sanyo
Model	LCD-32R45F
Category	LCD TV
Language	English