Basic Operations (Continued)
Press the VOL + or VOL- to increase or decrease the volume.
Press the MUTE button to temporarily turn off the sound. To restore the sound, press the MUTE button again.
Adjusting the Volume
Using the volume buttons (VOL+ and VOL – )
Using the Mute
Displaying the Information Banner
In DTV mode, your TV can display a program guide, if available. The guide may show a list of available programs, program
times, and program summaries. The displayed information is provided by the DTV channel.
! Press GUIDE, the program guide opens. If there is additional program information, press this button to display the
information.
! To close the program guide, press this button or wait a few seconds and the banner closes automatically.
Displaying the DTV Program Guide
You can press INFO button to display information banner. The information banner will display current program information
such as channel number, or video input source, resolution, etc. To close the banner, press this button again or wait a few
seconds and the banner closes automatically.
l Some DTV programs’ information banner may not contain all the above information. It will vary depending on the
broadcaster.
Note:
In analog TV mode, it will display the following information:
- Channel number
- Channel label (if preset)
- Signal type
- Audio information (Stereo or SAP or Mono)
- Resolution
In DTV mode, it will display the following information:
- Channel number and station name
- Channel label
- Broadcast program name
- TV rating
- Signal type
- Audio information
- Resolution
- CC mode
- Current time, current program start and end play times
19
To Next Page
Loading...
Need help?
General
