Sanyo LCD-32R45F User Manual

Adjusting CHANNEL Menu Options (Continued)
Option
Description
Channel No.
&
Channel Label
DTV Signal
You can check the DTV signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
To check the DTV signal strength, you can open
the Channel menu, and the DTV Signal status
appears at the bottom of the menu.
Press 6or5 to enter a character, then press 3or4 to move to the next position. Repeat to
add more characters.
3
Press 6or5 to highlight Channel Label, then press ENTER to open the channel label
screen.
2
Press MENU to exit to the previous menu.
4
If a channel is not already labeled, you can label the channel to make it easier to identify. Also
you can rename the channel already labeled.
Select
Move
MENU
Exit
A B C –
Press 56to highlight the channel you want to hide (the default is to show the channel), then
press ENTER to remove the check mark from the channel. The check mark appears if you add
back the channel by pressing ENTER again.
2
Lets you delete channels from the channel list so your TV skips the channels when you press
Channel up/down button. You can still tune to the channel using the number buttons.
Show/Hide
In Channel menu, select Show/Hide item, press ENTER to access.
1
Select
Move
MENU
Exit
Channel No. Channel Name Show
1.2 Sencore
2.0
2.1 WGBH-SD
2.2 PBS-HD
2.10 WGBH-Dx
6.0
7.0
12.0
14.0
11.1 MBC DTV
Press
ENTER
Move
MENU
Exit
Channel No.
Channel Label
DTV Signal:
Cable
2.1
Good
WGBH-SD
Show/Hide
Select
Auto Scan
Favorites
TV Source
Move
MENU
Exit
Channel No.
DTV Signal:
Cable
2.1
Good
Show/Hide
Select
Auto Scan
Favorites
TV Source
Channel Label
WGBH-SD
Move
MENU
Exit
Channel No.
DTV Signal:
Cable
2.1
Good
Show/Hide
Select
Auto Scan
Favorites
TV Source
Channel Label
WGBH-SD
31
SetupAudioSetupAudio
SetupAudio
SetupAudio
SetupAudio
Channel
Picture
Channel
Picture
Channel
Picture
Channel
Picture
Channel
Picture
Press
ENTER
In Channel menu, press 6or5 to highlight Channel No., then press 3or4 to select the
channel you want to label.
1
Note: If the list has more than one page, press 3or4to scroll through the pages.

Sanyo LCD-32R45F Specifications

General

Brand	Sanyo
Model	LCD-32R45F
Category	LCD TV
Language	English