12
R/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (not supplied).
Side Terminal
CONTROL PORT CONNECTOR
When controlling the projector from a computer,
connect the computer to this connector with a
control cable.
Part Names and Functions
USB CONNECTOR (Series B)
Use this connector when controlling a computer
with the remote control of the projector. Connect
the USB terminal of your computer to this
connector with the supplied USB cable (p.20).
VIDEO INPUT JACK
Connect the composite video output signal from
video equipment to this jack (p.21).
Downloaded From projector-manual.com Sanyo Manuals
To Next Page
