4 Click New button.
5 Enter a program name and click Add button.
6 The folder selection window appears and select a folder in
which the JPEG data are stored and then click Add button to
register into the folder lists.
Add ......................Displays the folder selection window.
Delete .................Deletes the folder path from the folder list.
UP ........................Moves up the selected folder path.
DOWN ................Moves down the selected folder path.
Edit ...................... Used to set up the display order or display time of the image individually. For further
information, see the item "Setting up the display order and time of the images" on the next
page.
✐ The order of the display is listed in the folder list window. To change the order of the display, change the list
order of the folder list by using UP or DOWN button.
✐ The programs are stored into the "DispParam" folder at the login root directory and this "DispParam" folder is
made by software automatically.
7 Click Register button to register the folder list into the program.
8 Click Close button to quit the Program Editor.
Change : Changes the contents of
the program file.
Remove : Removes the program from
the list.
To Next Page
Loading...
