75
Setting up the projector
Click Setting on the main menu. This function is to set up the projector. Select the
sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting.
Item Description
Screen........................Switches the screen mode. There may not be available
mode depending on the input mode as shown in the
table below.
Input source
Screen mode Video Computer
Normal
True *
Wide *
Full
Custom
The mark "" indicates the available screen mode in the selected input
source system. The error message appears when the disabled screen mode
indicated with "*" is selected.
Setting up the projector
To Next Page
Loading...
