77
Setting up the projector
Item Description
Factory default................ Sets all of the projector control items to the factory
default setting except the following items.
Lamp Corres. Value, PJ time, Filter time, PIN code lock
and Logo PIN code lock.
P-Timer ......................Switches the P-Timer display.
ON.......... Starts P-Timer indication
STOP...... Stops P-Timer counting
OFF ........Stops P-Timer indication
Closed caption........Sets the closed caption function.
Closed caption..Sets the closed caption mode. (OFF/CC1/CC2/CC3/
CC4)
Color.....................Sets the color of the contents. (Color/White)
Item Description
Filter counter...........Displays the filter use time. Reset the time after filter
clean-up.
Filter warning..........Sets the time to indicate the filter warning message
on the screen.
Factory default................ Sets all of the projector control items to the factory
default setting except the following items.
Lamp Corres. Value, PJ time, Filter time, PIN code lock
and Logo PIN code lock.
No show....................Sets the black out image temporarily.
Freeze.........................Sets the image to freeze mode.
Item Description
Fan ..............................Sets the cooling options after turning off.
L1 Normal cooling
L2 Silent cooling
Fan control..............Sets the fan control speed.
Off Normal mode
On1 Highland mode 1
On2 Highland mode 2
On3 Highland mode 3
Lamp Corres. value
... Displays the use time (Corresponding value) of the
lamp and reset the counter.
To Next Page
Loading...
Need help?
General
