Sanyo PLC-XU116

147
Auto Capture
N I have deleted the AutoCapture program file on the supplied USB memory.
I want to perform the AutoCapture with a commercially available USB memory.
To perform AutoCapture, you should have all files and folders of "Auto Capture" folder on ‘Network
Viewer & Capture 5 (CD-ROM)’ on the root of USB memory. By copying or drag and dropping
those files and folders on the root of a commercially available USB memory, you can perform the
AutoCapture as well as a supplied USB memory.
CD-ROM > AutoCapture USB thumb drive
Troubleshooting
N Auto Capture does not start automatically.
Depending on a computer or the security setting of the network, AutoCapture may not start
automatically. Please make sure the examples as follows. Please consult your network administrator
in detail.
- When setup as follows in a computer with Windows Vista
Click start button, and click [Control Panel] - [AutoPlay], and Take no action is selected in
"Software and games".
- Please select the other options.
- When "Autorun.inf" is denied in a computer as an anti-security measure in your local area
network environment.
- Please consult your network administrator.
USB display
N Projector does not reproduce the computer's image by USB display function.
Check the settings of the projector as follows:
- Select "Display" in "USB terminal" of Setting menu (p.34).
- Select "USB display" in "LAN mode select" of Network menu (p.34).
Check the connection with the computer as follows:
-
A USB cable should be connected directly between the projector and the computer. "USB display" function
may not operate with connecting via a USB hub or a USB switching unit
(p.34).
- Depending on a USB devise (USB controller in computer), this USB display function may not be available.