Sanyo PLC-XU116

25
This software is to project the computer screen via the networks.
Click "Network Capture 5" from "Macintosh HD" --> "Application" -->"Network Capture 5" menu, then
following screen will appear. Then the program will start.
Parts Names and Functions of the Screen
DSearch PJ button
Search the projector connected to the networks.
JSpecify IP button
When connected to a different segment network, the projector can not be retrieved automatically.
In that case, press this button, the "Search specified IP address list" window appears, and then
click Add button and enter the IP address directly to specify the projector in another window. The
registered multiple IP addresses can be searched at a time.
8Network Projector List
Display all the projectors connected to the networks.
Show unoccupied projector as “On standby” and occupied projector as “Real time capturing” or "In
One-shot mode". The indication of the status of use with "#" indicates that your computer is now
using the network capture function.
After double-clicking on a projector name, the web browser gets activated and the projector setup
screen will be displayed.
Network Capture 5 window
D J <
8
E
G
L
H
Network Capture 5 window
B