106
Chapter 9 Appendix
Firewall setting for MAC OS X v 10.5
If you use Macintosh OS X v 10.5 and Network Capture 5, you may see the security warning dialog
as below. In that case, click "Always Allow" button on the dialog to enable the function of Network
Capture 5.
Even if you select "Deny", you can cancel the
blocking following to the steps below;
1 Open System Preference from Apple
menu, click Security icon. A security
setting window appears.
2 Select Firewall tab, check Limit incoming
connections to specific services and
applications, and then click "+". A finder
menu appears.
3 Select Network Capture 5 and click add
button. The application name will be
added in the column.
4 Click the options of "Allow incoming
connections" or "Block incoming
connections" in the column and select
"Allow incoming connections".
5 Close setting.
To Next Page
Loading...
