10
Memory Viewer function
Duplicating the data into the USB thumb drive
It is described how to duplicate the data converted with the Network Viewer 5 [File Converter 1, File
Converter 2] into the USB thumb drive through the network.
1. Launch the explorer software of the computer and type the IP address of the projector which has the
USB thumb drive onto the address column. For example, "ftp://192.168.1.201".
The contents of the USB thumb drive appear on the explorer window as below.
2. Move the projection data from the computer into the USB thumb drive.
Note:
If the network PIN code is set for the projector, the authentication window appears as below. In that
case, enter "user" into the User Name column and the network PIN code of the projector into the
Password column. *User Name must be "user".
To Next Page
Loading...
