Schematic Diagrams
CAUTION
Components indicated by a mark ! in this schematic diagram
have the special significance in the safety. It is therefore, particu-
larly recommended that the replacement of those parts must be
made by exactly the same parts.Must be used with a specified
fuse. Unauthorized substitutions may result in fire or accident.
This projector is isolated from AC line by using the internal con-
verter transformer. Please pay attention to the following notes in
servicing.
1. Do not touch the part on hot side (primary circuit) or both parts
on the hot and cold sides (secondary circuit) at the same time.
2. Do not shorten the circuit between hot and cold sides.
3. The grounding lead must be connected to the ground of the
same circuit when measuring the voltages and waveform.
CAUTION
Fuse of the specified parts number must be used.
Unauthorized substitutions may result in fire or accident.
To Next Page
Loading...
