Sanyo plc-xu4001 User Manual

49
Setting
+'0,VHWXS
+'0,VHWXS
7HUPLQDO
The COMPUTER IN 2/MONITOR OUT terminal
on the back of the projector is switchable for
computer input or monitor output (p.9). Select
Computer 2 or Monitor out with the Point Ÿź
buttons.
Computer 2 ....... computer input
Monitor out ........... monitor out
Terminal function is not available when
selecting Computer 2 to the input source.
Change the input source to the others
(&RPSXWHUand so on) so that the Terminal
function will be available. (pp. 25, 27, 37)
This function is only used for HDMI input source.
,PDJH
Select Normal or (QKDQFHG to match the
video range setting of your HDMI Digital
RGB equipment.
Sound
+'0,: When using the HDMI cable, select
+'0,.
Both video and audio are
transferred and you need not to
connect any additional cables for
audio.
Computer 2: When using the DVI-HDMI cable,
select Computer 2 and connect
the audio cable to COMPUTER IN
2 terminal.
The names for the output setting of Digital RGB
vary from equipment to equipment. For details,
refer to the owner’s manual of your Digital RGB
equipment.
When the black parts of the image are
destroyed or stand out, please switch to
Normal or (QKDQFHG, and then switch the
output type of the HDMI Digital RGB output
equipment.

Sanyo plc-xu4001 Specifications

General

Brand	Sanyo
Model	plc-xu4001
Category	Projector
Language	English