17
7-1-2. Outdoor Unit
AVOID:
●
heat sources, exhaust fans, etc. (Fig. 4)
●
damp, humid or uneven locations.
DO:
●
choose a place as cool as possible.
●
choose a place that is well ventilated.
●
allow enough room around the unit for air intake/
exhaust and possible maintenance. (Fig. 5a)
●
provide a solid base (level concrete pad, concrete
block, 10
×
40 cm beams or equal), a minimum of
10 cm above ground level to reduce humidity and
protect the unit against possible water damage
and decreased service life. (Fig. 5a)
●
Install cushion rubber under unit’s feet to reduce
vibration and noise. (Fig. 5b)
●
use lug bolts or equal to bolt down unit, reducing
vibration and noise.
To Next Page
Loading...
Need help?
General
