Operation with the Remote Control Unit (continued)
NOTE
•
Choose the best position in the room for the remote control unit,
which also acts as the sensor for room comfort and transmits the
operating instructions. Once you’ve found this best position, always
keep the remote control unit there.
•
This appliance has a built-in 3-minute time delay circuit to ensure
reliable operation. When the operation button is pressed, the
compressor will start running within three minutes. In the event of
power failure, the unit will stop. When the power is restored, the
unit will restart automatically after three minutes.
3. Adjusting the Fan
Speed
A. Automatic Simply set the FAN SPEED selector button to the position.
The fan speed is controlled automatically depending on the operating
frequency, as shown below.
B. Manual If you want to adjust fan speed manually during operation, just set the
FAN SPEED selector button as desired. [
, ,or ]
FAN SPEED
CONTROL
High speed
Very low
speed
Compressor
OFF
Low
frequency
High
frequency
FREQ.
20 OI-275-20EG
OI275000
To Next Page
Loading...
Need help?
General
