Operation with the Remote Control Unit (continued)
4. Fan Only
If you want to circulate air without any temperature control, follow these
steps:
STEP 1: Press the MODE selector button to switch to the fan mode
(
).
STEP 2: Press the ON/OFF operation button.
STEP 3: Press the FAN SPEED selector button to select the fan speed of
your choice (
, , ,or ).
If the fan speed is set to auto (
), the fan speed switches to low.
Also, when the airflow direction is set to AUTO (
), the flaps are in
position (
). (See ‘‘Adjusting the Airflow Direction and Strength’’.)
5. Night Setback Mode
Night Setback Mode is used for saving energy.
Press the NIGHT SETBACK button while operation.
The
mark appears in the display.
To release the night setback function, press the NIGHT SETBACK button
again.
STEP 2
STEP 1
STEP 3
21OI-275-21EG
OI275000
To Next Page
Loading...
Need help?
General
