Operation with the Remote
Control Unit
1. Automatic Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that
the operation selector of the indoor unit is in the ON position.
Once the
mode is selected and the unit is preset by following the
steps below, you can have the air conditioner automatically bring the
room to the desired temperature simply by pressing the ON/OFF
operation button.
STEP 1 Press the MODE selector button to select .
STEP 2 Press the ON/OFF operation button.
To stop the air conditioner, press the ON/OFF operation button again.
STEP 1
STEP 2
17OI-275-17EG
OI275000
To Next Page
Loading...
Need help?
General
