Operation with the Remote Control Unit (continued)
2. Manual Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that
the operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs,
press the setting buttons as described below and change the settings as
desired.
STEP 1 Press the MODE selector button and select the
desired mode.
For heating operation →
For dehumidifying operation →
For cooling operation →
For circulating operation →
STEP 2 To start the air conditioner, press the ON/OFF
operation button.
STEP 3 Press the TEMP. setting buttons to change the
temperature setting to the desired temperature.
Adjustable temperature range:
30 °C max.
16 °C min.
STEP 4 Set the FAN SPEED selector button to the setting you
want.
NOTE
If the fan speed is set to
(Automatic), the fan
speed switches automatically, according to the
difference between the actual room temperature and
the temperature setting.
STEP 5 Press the FLAP buttons and set the airflow direction
as desired.
(Refer to ‘‘Adjusting the Airflow Direction and
Strength’’ on page 29.)
To stop the air conditioner, press the ON/OFF operation button again.
STEP 5
STEP 1
STEP 4
STEP 3
STEP 2
19OI-275-19EG
OI275000
To Next Page
Loading...
Need help?
General
