Sanyo VWM-700 User Manual

VHS Hi-Fi STEREO SYSTEM/MTS BROADCAST
36
II
FUNCTION OSO : ON
LANGUAGE SELECT:ENGLISH
M ll• ll •l ,\l tl il ld jl
BROADCAST TYPE : STEREO
AUDIO OUTPUT : STEREO
CHANNEL MAPPING
Dll SELECT DCI ADJUST
TO EXIT PRESS l!lml
FUNCTION OSO : ON
LANGUAGE SELECT:ENGLISH
AUDIO MODE: HI-FI
BROADCASTTYPE: STEREO
tl\ lftl lii.UIIijh IIJ U ij I
CHANNEL MAPPING
Dll SELECT DCI ADJUST
TO EXIT PRESS l!lml
This VCR is equipped with the VHS Hi-Fi audio sound system for
recording and
playback. The information below gives a brief
description of Hi-Fi audio and how to record and
play a tape in
the Hi-Fi audio mode.
To enjoy the Hi-Fi stereo system, you connect your VCR's
AUDIO(R/L)NIDEO OUT jacks to the AUDIO(R/L)NIDEO
INPUT
jacks on back your TV (or another AN system) using
the
AN cable.
PLAYBACK WITH Hi-Fi STEREO AUDIO SOUND
A stereo TV with AUDIONIDEO input jacks or a stereo audio sys-
tem is required for true stereo playback. To experience the full and
rich stereo sound available with Hi-Fi recorded tapes, we recom-
mend the connection of this unit to a home stereo audio system.
1 Set the AUDIO MODE item to HI-FI on the SETUP menu .
2 Set the AUDIO OUTPUT item to STEREO position.
(STEREO) POSITION: The left channel sound (L) is heard from
the
left speaker and the right channel sound (R) is heard from
the right speaker.
(LEFT)
POSITION: The left channel sound (L) is heard from both
speakers.
(RIGHT) POSITION: The right channel sound (R) is heard from
both speakers.
3 Insert a cassette and press PLAY .
Adjust volume at your stereo system.

Sanyo VWM-700 Specifications

General

Brand	Sanyo
Model	VWM-700
Category	VCR
Language	English