Sartorius arium mini - arium mini plus: Starting up the Device

Operating Instructions arium
®
mini plus | arium
®
mini 29
Startup
Procedure
t Check whether the plug design of the power cord is equivalent to your country’s
standard. If required: Call the Sartorius Service or your dealer.
t Connect the power supply to the connection labeled “Power” on the rear of the
device.
t Fix the power supply to the housing using the supplied Velcro strip. Pull the
Velcro strip through the eyelet as shown in the figure.
t Lay the protruding power supply cable so that it cannot be damaged or obstruct
subsequent connection of hoses.
t Connect the device to the AC power using the power cord.
y The device starts up and performs a system scan.
arium mini
%RRWLQJGHYLFH