Operating Instructions arium
®
mini plus | arium
®
mini 63
Cleaning and Maintenance
8 Cleaning and Maintenance
8.1 Cleaning the Display
Procedure
t To avoid uncontrolled changes to the settings of the device: Activate standby
mode (see Chapter 7.3.2, page 60).
t Wipe the display gently with a soft, dry cloth.
t Deactivate standby mode (see Chapter 7.3.2, page 60).
8.2 Cleaning the Device Housing
Danger of injury caused by electric current!
When cleaning the device and its components while they are connected to the
power supply, there is a risk of electric shock.
t Always disconnect the device from the AC power.
The electronic equipment could be damaged by improper cleaning!
Liquids or dust can damage the device or the power supply.
t Never open the power supply or the right side of the device housing.
t Make sure that no liquids or dust get into the device or the AC adapter.
Damage to the device surfaces!
Aggressive cleaning agents may damage device surfaces.
t Never use cleaning agents that contain solvents, acetone or abrasive ingredients.
Procedure
t Disconnect the device from power.
t Wipe the housing of the device with a damp cloth.
t If required: Remove the front and left covers and clean the internal components.
t Dry the device with a soft cloth afterwards.
To Next Page
Loading...
