28 Operating Instructions arium
®
mini plus | arium
®
mini
Startup
6.2 Unpacking and Setting up the Device
Risk of electric shock due to leaking water!
Water may spill when using the device. Electric shocks can occur if water comes into
contact with electrical appliances.
t Do not place the device close to electrically powered devices.
Danger of fire or explosion!
The arium
®
mini and the arium
®
mini plus contain components that can ignite
flammable or combustible materials.
t Do not operate the device in the vicinity of such substances.
Tip
It is recommended to have the installation and setting up of the device carried out
by a qualified Sartorius service technician.
t Call the Sartorius Service.
Requirements
A feed water supply, a power outlet and an unpressurized outlet are located a
maximum of 2 meters away.
Procedure
t Remove the device from its packaging and place it on a flat, stable surface.
6.3 Connecting the AC Adapter
Risk of electric shock due to incorrect handling of power cables!
The use of damaged or non-standard power cables as well as the mishandling of
power cords can cause fatal electric shock or equipment damage.
t Only connect the device (protection class 1) to properly installed power sockets
with protective grounding conductors (PE) with a fuse of a maximum of 16 A.
t Use only standard cables that have protective grounding conductors for
operation.
t Never disconnect the device from the protective grounding conductor.
t Connect to the power supply according to the regulations of your specific
country.
t Never plug the power cable into the mains wall outlet when it is disconnected
from the device.
t Make sure that the power plug or another suitable disconnecting device for the
power can be easily reached in case of danger.
Equipment damage due to operation with third-party equipment!
The use of third-party power supplies not authorized by Sartorius may cause damage
to the device.
t Use only the original Sartorius power supply.
To Next Page
Loading...
