66 Operating Instructions arium
®
mini plus | arium
®
mini
Cleaning and Maintenance
8.6.1 Changing the Bag
Requirements
In the “Change consumable” menu, the menu item [
Bag] is activated.
y The dialog box “Drain bag” appears.
Procedure
t Check whether the tank outlet tubing is connected to the “Bag Outlet”
connection. If required: Connect the tank outlet tubing.
t Guide the tank outlet tubing into a suitable container.
t In order to empty the bag completely: Place the container underneath the device.
t Open the ball cock of the tank outlet tubing.
y Pure water flows out of the bag.
t When the bag is empty: Confirm the emptying of the bag with the [
OK] button.
y The dialog box “Change bag” appears.
t Remove the left cover of the device by pulling it up.
t To make it easier to reach the lower connections on the device: Pull the tray up
and remove it from the device.
t Tap the gray quick connector button on the three device connections successively
and pull the bag hoses out of the connections.
t Slide the old bag out off the guide rail and remove it from the device.
1
m
Drain bag
2SHQWKHWDQNRXWOHW%DJ2XWOHWDWWKH
UHDURIWKHGHYLFH
OK
1
Change bag
5HPRYHWKHOHIWFRYHURIGHYLFH,QVHUW
WKHHPSW\EDJDVGHVFULEHGLQWKH
PDQXDO3XWWKHOHIWFRYHUEDFNRQ
OK