Operating Instructions arium
®
mini plus | arium
®
mini 41
Startup
t Close the tank outlet (Bag Outlet) on the rear side of the device.
y After the rinsing process starts, the remaining rinse time is displayed in minutes.
t In order to cancel the rinsing process, e.g. if a sufficiently large vessel is
unavailable: Tap the [>] button.
y The dialog box “Start rinsing” appears again.
t Continue the rinsing process as described above.
t Remove the dispense tube. To do this, use the tubing removal tool to push the
dark ring of the quick connector up and pull the dispense tube down and out.
t Confirm the rinsing process with the [OK] button.
y The dialog box “Connect filter” appears.
1
Close bag outlet
&ORVHWKHWDQNRXWOHW%DJ2XWOHWRQWKH
UHDUVLGHRIWKHGHYLFH
OK
m
Rinsing
PLQ
1
&RQQHFW¿OWHU
&RQQHFWWKHVWHULOH¿QDO¿OWHUDV
GHVFULEHGLQWKHPDQXDO
OK