7
SARTORIUS Basic
plus
Semimicro-Balances
bp-a-05a.tif
Exiting the Menu without Storing:
– To exit the menu, press p. This returns you to the first position in the
balance operating menu.
– If you do not wish to store the changes, press the e key to deactivate
this menu item during the selection procedure or before storing by
pressing t.
Note:
Once you have quit the operating menu, you should always block access to
the menu using the menu access switch. Move the switch to the left and
replace the cap.
Displaying the Hardware and Software Versions
– Turn the balance off and back on again using the e key.
– While all display segments are lit (“Segment Test”), briefly press the
p key; the display is now as indicated in the figure on the left.
– This remains displayed for about 3 seconds.
– The first two numbers show the hardware generation; the last two, the
software version.
– The display then returns to the normal weight readout mode.
bp-a-07a.tif
bp-a-08a.tif
bp_r1b_d.tif
bp-a-09a.tif
Menu Access
Switch
Back Panel
To Next Page
Loading...
