5
SARTORIUS Basic
plus
Semimicro-Balances
Table of Adjustment Data for Basic
plus
Balances
BP210D, BP300S (see page 21 for the technical specifications)
Self-Test
After the balance has been turned on, an automatic self-test of the balance’s
electronic circuitry is performed. At the end of the self-test, a zero readout is
displayed. This means that the balance is ready to operate. (See page 25
for error codes.)
Auxiliary Tools and Equipment
Make sure to use the proper tools and equipment when operating your
balance. Also ensure that the balance is set up on a solid, level surface and
in a clean work area that is free of vibrations and drafts. You will need the
following weight sets to adjust Sartorius BP210D/300S Balances:
Required Weight Sets with Calibration Certificates:
Unit/Set Designation Order No.
1 Analytical weight set Class E2 YCS 01-522
2 Adjustment keys 6740-15
Accompanying Literature
Spare Parts List for Sartorius Basic
plus
(see page 29)
Table of Adjustment Data for Basic
plus
Balances (see page 21)
Sartorius MC1 Server - General Instructions for Usage
Sartorius Basic
plus
Interface Description.
Function of the Keys
e ON/OFF key
c Clears or interrupts functions or programs
q Adjustment/calibration key
v Function key - activates the selected application program
p Print key
t Tare key
bp-r-2-d.tif
To Next Page
Loading...
