40 Operating Instructions Cubis
®
MCA
Operating Design
Level 1 Level 2 Level 3 Description
Device
settings
Display settings Display brightness Define the brightness of the
operatingdisplay.
On | off switch Activate or deactivate the “energy saving”
function.
Color scheme Define the settings for the operating display
color scheme if this extension has been
configured in the QAPP Center.
Sound (loudspeaker) Touch sounds Activate or deactivate the acoustic signal
when operating a button.
Message sounds Activate or deactivate the acoustic signal
for messages.
Sound for end-of-action Activate or deactivate the acoustic signal
for the end of an action.
Device
Maintenance
Update firmware List of connectors and
then list of firmware
− Starts a firmware update.
− Not for conformity-assessed devices.
Install QAPP Center List of connectors and
then list of QAPP Centers
Updates the QAPP Center using
theselected connector.
Install customized
QAPP
List of connectors and
then list of customized
QAPPs
Updates a customized QAPP using
theselected connector.
Device data backup List of connectors Saves the device data on the selected
connector.
Restore device data List of connectors Loads saved device data from
theselectedconnector.
Export device data Role management Saves device role management for
anadministrator, user, or guest on
theselectedconnector.
User management Saves device user management for
anadministrator, user, or guest on
theselectedconnector.
Export overview Displays the list of connectors, e.g., a server
or connected USB stick.
Import device data List of connectors for
import
Loads the device data with role and user
management, e.g., from a server or
connected USB stick.
Reset to factory
settings
Restore factory settings − Resets the device to factory settings
andwwdeletes all configurations.
− The audit trail and data memory
willberetained.
Create
diagnosticfile
Save information about the device
configuration and the ongoing operation
onaconnected USB stick.