Sartorius Cubis MCA225P Series User Manual

Operating Instructions Cubis
®
MCA 99
Cleaning and Maintenance
9.6 Performing a Software Update
A software update can be installed from a USB mass storage device using
the device’s USB-A connection. An update can also be carried out from
aserver via other connectors of the device. A software update can extend
orchange functionality.
Requirements
− The device is switched on.
− The software update is saved on a USB mass storage device.
− The USB mass storage device is formatted with file system “FAT32”.
Procedure
t Download the software update from the Sartorius website onto the
USBmass storage device.
t If this relates to a zip file: Unzip the software update on the stick. The files
must be saved at root level. The files must not be set aside in a folder.
t Insert the USB mass storage device with the software update into one
ofthe device’s USB-A connection sockets.
t Select the “Update Firmware” menu entry in the “Settings / Device
Maintenance” menu.
t Select “USB stick” as the connector.
y The software update takes approx. 3 minutes.
y Once the software update is complete: The software version number
isupdated in the login display.

Sartorius Cubis MCA225P Series Specifications

General

Brand	Sartorius
Model	Cubis MCA225P Series
Category	Laboratory Equipment
Language	English