Sartorius Signum 3 Operating Instruction

19
Operating Menu
= Setting/function available in Signum 1 only
= Setting/function available in Signum 2 and Signum 3 only
* Factory setting
Menu
appl Application programs
appl1**
weigh.
Basic Weighing Function
3.5. Minimum load for automatic taring and automatic printing
3.5.1* 1 digit
3.5.2 2 digits
3.5.3 5 digits
3.5.4 10 digits
3.5.5 20 digits
3.5.6 50 digits
3.5.7 100 digits
3.5.8 200 digits
3.5.9 500 digits
3.5.10 1000 digits
3.7. Automatic taring: first weight tared
3.7.1* Off
3.7.2 On
9.1. Factory settings for all application programs
9.1.1 Yes
9.1.2* No
count. Counting
3.6. Minimum load for initialization
3.6.1* 1 digit
3.6.2 2 digits
3.6.3 5 digits
3.6.4 10 digits
3.6.5 20 digits
3.6.6 50 digits
3.6.7 100 digits
3.6.8 200 digits
3.6.9 500 digits
3.6.10 1000 digits
3.9. Resolution for calculation of reference value
3.9.1* Display resolution
3.9.2 Display resolution + 1 decimal place
3.9.3 Display resolution + 2 decimal places
3.9.4 Internal resolution
3.11. Parameter for saving weight (“storage parameter”)
3.11.1* At stability
3.11.2 At increased stability
3.12. Reference sample updating (“APW update”)
3.12.1 Off
3.12.3* Automatic
3.13. Reference weighing instrument
3.13.1* No reference instrument selected
3.13.2 Weighing platform WP 1
3.13.3 Weighing platform WP 2
** Menu level used in Signum 3 only

Sartorius Signum 3 Specifications

General

Brand	Sartorius
Model	Signum 3
Category	Scales
Language	English