Sartorius SIWRDCP - COM1 Interface Settings; Interface Port 1 Configuration; Data Protocol Settings (SBI)

Signum 1-2-3
Settings
Setup
Com1 2 Interface port 1
(Display designation of this menu level: 2)
off* Off
WP2 Weighing platform 2
rs-232 * RS-232
sbi-std SBI standard version
sbi-app SBI trade version (for legal metrology)
Xbpi-232 * XBPI-232
1
)
1.1. to 1.8.
Numeric menu similar to WP1
1.9. Calibration and Adjustment
1.9.1 * Ext. calibration/adjustment; default weight
1.9.3 External calibration/adjustment; weight can be selected under menu item 1.18.1
1.9.4 Internal cal./adjustment
1.9.10 No function when you press the
J key
1.10. to 9.1.
Numeric menu similar to WP1
adc-232 ADC-232
1
)
1.1. to 9.1.
Numeric menu similar to WP1
datProt Data protocol
sbi * SBI standard version
5.1. Baud rate
5.1.1 150 baud
5.1.2 300 baud
5.1.3 600 baud
5.1.4 * 1200 baud
5.1.5 2400 baud
5.1.6 4800 baud
5.1.7 9600 baud
5.1.8 19200 baud
5.2. Parity
5.2.2 Space
2
)
5.2.3 * Odd
5.2.4 Even
5.2.5 None
3
)
5.3. Number of stop bits
5.3.1 * 1 stop bit
5.3.2 2 stop bits
5.4. Handshake mode
5.4.1 Software handshake
5.4.3 * Hardware handshake, 1 character after CTS
5.6. Number of data bits
5.6.1 * 7 data bits
5.6.2 8 data bits
6.1. Data output (manual/automatic)
6.1.1 Manual without stability
6.1.2 * Manual after stability
6.1.4 Automatic without stability
6.1.5 Automatic with stability
6.1.7 Protocol printout for computer (PC)
1
) = Menu depends on weighing platform
2
) = Not for 5. 6. 2 (8 bits)
3
) = Not for 5. 6. 1 (7 bits)
27